| CELOS - ERGOline Touch |
CELOS - ERGOline Touch to facilitate
machine operation incl. 21.5 ERGOline Touch ® control with multi
touch screens Uniform management, documentation and visualization of
order, process - and machine data Networkable with CAD / CAM User
friendly and p |
| (Left Spindle) through-spindle hole dia.
91 mm, 4,000min-1 (STD) |
(Left Spindle) Through-spindle Hole dia.91 mm
(3.58 inch.), 4,000 min-1 (STD) (FANUC) turnMASTER Max. spindle
speed: 4,000 min-1 Spindle nose type: JIS A2-8 Through-spindle hole
diameter: F91 mm (dia.3.58 inch.) Spindle drive motor: 18.5/18.5/15 kW
(24.7 |
| (Right Spindle) through-spindle hole dia.
91 mm, 4,000min-1 |
(Right Spindle) Through-spindle Hole Dia.91 mm
(3.58 inch.), 4,000 min-1 (FANUC) turnMASTER FANUC specifications
Output: 18.5/18.5/15 kW (24.7/24.7/20 HP) (25%ED/50%ED/cont) Max.
spindle speed: 4,000 min-1 Max. torque: 599/505/409 Nm
(441.8/372.47/301.66 |
| (Spindle 1) KITAGAWA 10in. Hollow Chuck
BR10A821 (SK-OP) |
(Spindle 1) KITAGAWA 10-inch Hollow Chuck BR10A821
Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck
outer diameter: Ø254 mm (dia.10 inch.) Through-hole diameter: Ø81 mm
(dia. 3.18 inch.) Gripping diameter: Max. Ø254 mm (dia.10 inch. |
| (Spindle 1) Hollow Cylinder set for
KITAGAWA 10in. Hollow Chuck BR10A821 (Bar work capacity dia. 80 mm
(3.14 inch)) (without chuck body) |
(Spindle 1) Hollow Cylinder Set for KITAGAWA
10-inch) Hollow Chuck BR10A821 (Bar work capacity dia. 80 mm (3.15
inch)) (Without Chuck Body) Hollow cylinder and draw bar are included
as a set. Chuck is not included. Please see the chuck-cylinder
combinat |
| (Right Spindle) KITAGAWA 10in. Hollow
Chuck BR10A821 |
(Right Spindle) KITAGAWA 10-inch Hollow Chuck
BR10A821 Three-jaw hydraulic chuck manufactured by Kitagawa Iron
Works. Chuck outer diameter: Ø254 mm (dia.10 inch.) Through-hole
diameter: Ø81 mm (dia.3.18 inch.) Gripping diameter: Max. Ø254 mm
(dia.10 in |
| (Right Spindle) Hollow Cylinder set for
KITAGAWA 10in. Hollow Chuck BR10A821 (without chuck body) |
(Right Spindle) Hollow Cylinder Set for KITAGAWA
10-inch Hollow Chuck BR10A821 (Without Chuck Body) Hollow cylinder
and draw bar are included as a set. Chuck is not included. Please see
the chuck-cylinder combination diagram for the combination with
ch |
| Chuck foot switch (double) for spindle 1,
2 |
Chuck foot switch (double) for spindle 1, 2 Chuck
opening and closing on spindle 1 and 2 are operated by twin chuck
footswitch. |
| Standard Turn-mill Spindle, 12,000 min-1,
28/ 23 kW |
Standard turn-mill spindle, 12,000 min-1, 28/23 kW
(FANUC) compactMASTER 63|350 Max. turn-mill spindle speed: 12,000
min-1 Turn-mill spindle output: 28/23 kW (38.1/31.3 HP) (40% ED(2
min)/cont) Turn-mill spindle torque: 132/95.3 Nm (97.36/70.29 ft·lbf)
( |
| Capto C6 |
Capto C6 This specification uses the Capto C6
tool holder. |
| Tool spindle full indexing specifications
(STD) |
Tool spindle full indexing specifications
(Standard) |
| Preparation for automatic centering
steady rest SMW SLU-X3.2 (servo-driven) |
Preparation for Automatic Centering Steady Rest
SMW SLU-X3.2 (Servo-driven) This is an I/F for automatic centering
steady rest body attachment. When cutting a long workpiece, it
prevents vibration and deflection. The steady rest arm is
automatically op |
| Automatic Centering Steady Rest SMW
SLU-X3.2 (dia.50-200 mm, Unit Only) (SK-OP) |
Automatic Centering Steady Rest SMW SLU-X3.2
(Dia.50-200 mm, Unit Only) Automatic centering steady rest
manufactured by SMW. The steady rest prevents vibration and
deflection of a long workpiece during machining. Interface is not
included. Please select |
| Tool storage capacity 76 tools (Capto
C6) |
Tool Storage Capacity 76 Tools (Capto C6) Tool
capacity: 76 tools Max. tool diameter - With adjacent tools: Ø70 mm
(dia.2.76 inch.) - Without adjacent tools: Ø130 mm (dia.5.12 inch.)
Max. tool length: 400 mm (15.75 inch.) Max. tool mass: 8 kg (17.6
lb.) |
| Chip conveyor (right discharge, hinge
type + drum filter type) (/1500) |
Chip Conveyor (Right Discharge, Hinge Type + Drum
Filter Type) (/1500) This chip conveyor is suitable for discharging
all types of metal chips other than powdery ones. Long chips are
conveyed and discharged using the hinge belt. Fine chips are
accumulat |
| Super-High-Pressure Coolant System (3.5
MPa, Constant Pressure) (Through-spindle Coolant System for Turn-mill
Spindle) (SK-OP) |
Super-High-Pressure Coolant System (3.5 MPa (507.5
psi), Constant Pressure) (Through-Spindle Coolant System for
Turn-mill Spindle) Supplies high-pressure coolant to the tool tip from
the through hole in the Turn-mill Spindle and tool. Effective for
remo |
| Coolant flow switch for through-spindle
coolant system |
Coolant flow switch for through-spindle coolant
system The flow switch detects if the through spindle coolant is
flowing or not. An alarm occurs when the flow amount becomes less than
the set level (Note 2) for a specified time. An alarm halts the
machi |
| Coolant chiller (SK-OP) |
Coolant Chiller (Separate Type) The coolant
chiller cools coolant in the coolant tank according to a rise in the
machine temperature. Controlling the coolant temperature suppresses
the rise in temperature of the workpiece and tool and achieves the
stabl |
| Coolant float switch (lower limit
detection) |
Coolant Float Switch (Lower Limit Detection) It
controls the coolant level (lower limit detection). An Alarm is
displayed on the operation panel when the coolant falls below the set
level. |
| Air blow for tool tip (tool spindle) |
Air blow for tool tip (tool spindle) The air blow
removes chips adhering to the tool tip. The air blow is controlled by
M codes in the program. The air blow is turned on by M458, and off by
M459. |
| Air blow for chuck (spindle 1) |
Air blow for chuck (spindle 1) The air blow
removes chips adhering to the chuck. This prevents loss of gripping
accuracy caused by chips caught in the machine. The air blow for the
spindle (chuck) is controlled by M codes in the program. The air blow
is |
| Mist collector (AFS 1600), including
stand |
Mist Collector (AFS 1600), Including Stand The
mist collector collects dust and particles and condenses oil mist and
smoke generated during the machining process. The filtered mist is
returned back to the coolant tank. This option includes stand to
moun |
| Oil skimmer (Screw type) |
Oil Skimmer It removes oil that floats on the
surface of coolant in the coolant tank to maintain the coolant
quality and inhibit the coolant deterioration. This can reduce the
coolant disposal cost. The screw type oil skimmer is adopted, which
separate |
| Full-closed loop control for X-axis
(Turn-mill Spindle) (Direct scale feedback) |
Full-closed Loop Control for X-axis (Turn-mill
Spindle) (Direct Scale Feedback) The magnetic scale is used for the
X-axis position sensing of the Turn-mill Spindle, instead of the axis
servomotor pulse encoder. It is not susceptible to ball screw
precis |
| Full-closed loop control for Y-axis
(Turn-mill Spindle) (Direct scale feedback) |
Full-closed Loop Control for Y-axis (Turn-mill
Spindle) (Direct Scale Feedback) The magnetic scale is used for the
Y-axis position sensing of the Turn-mill Spindle, instead of the axis
servomotor pulse encoder. It is not susceptible to ball screw
precis |
| Full-closed loop control for Z-axis
(Turn-mill Spindle) (Direct scale feedback) |
Full-closed Loop Control for Z-axis (Turn-mill
Spindle) (Direct Scale Feedback) The magnetic scale is used for the
Z-axis position sensing of the Turn-mill Spindle, instead of the axis
servomotor pulse encoder. It is not susceptible to ball screw
precis |
| Automatic in-machine tool presetter for
tool spindle (in-out type) (without lower turret specifications) |
Automatic in-machine tool presetter for tool
spindle (in-out type) (without lower turret specifications) Allows
highly efficient tool measurement, improving ease of setup. The
presetter is stored in the upper part of the Spindle 1 chuck cover and
is move |
| EtherNetI/P I/F |
EtherNetI/P I/F This I/F is used for transferring
control signals between the machine and peripheral equipment via
Ethernet. This I/F can be connected to all peripheral equipment that
has terminals corresponding to LAN cables. This specification
also |
| Interface for Bar feeder (LNS)
(multiple) |
Bar Feeder Interface (LNS) (multiple) The Bar
feeder interface (I/F) is intended for connection to the bar feeder,
which achieves higher productivity by the automatic bar stock feed.
To install any bar feeder other than the LNS-made, the I/F needs to
b |
| Dry anchor |
Dry anchor Anchors are fitted to prevent the
machine from moving due to small earthquakes and vibrations during
operation. They restrict movement in all directions as far as
possible. Fork-cut anchors must be driven in before installation. |
|
|
| Manual pulse generator (separate
type) |
Manual pulse generator (separate type) Adding
handy type pulse handle improves operability during set-up operation.
The switch on the operation panel can change which pulse handle is
used on the operation panel or handheld side. Handheld pulse handle
o |
| Voltage of Customer Factory 380 V |
Voltage of Customer Factory 380 V This D41152871
machine is shipped with voltage set to 220 V specification. Please
arrange transformer if necessary. (Caution) IF the setting is
incompatible, there is a possibility of trouble such as operation
abnormality and ala |
| Frequency 50 Hz |
Frequency 50 Hz This machine is shipped with
frequency set to 50 Hz specification. (Caution) IF the setting is
incompatible, there is a possibility of trouble such as operation
abnormality and alarm occurrence. Be sure to check the supply voltage
and fr |
| Setting Unit mm |
Setting Unit, MM The unit to be used for the
screen display and program commands is set to millimeter (mm).
Turning: MM specification for the turret Horizontal machining center:
MM specification for the tapped pallet |
| Counter spindle tip (SK-OP) |
Counter Spindle Tip With the fixed center fitted
in the tool holder, the turn-mill spindle is approached to the left
or right spindle, and the fixed center is clamped by the chuck of the
turning spindle. The fixed center is then pulled out from the
tool |
| Alternating speed |
Alternating Speed It can suppress regenerative
chattering by fluctuating spindle speed. The cycle is automatically
calculated only by setting the fluctuation width in the guidance
screen. Regenerative chatter is created by excitation resulting from
t |
| Multi Threading 2.0 (SK-OP) |
Multi-threading 2.0 Programs for large diameter
threads or special shape threads, which are not covered by the
standard thread cutting cycle, can be created by following the
guidance. (trapezoidal thread, square thread, sharp thread, round
thread, worm |
| 3D Quick SET |
3D quickSET It is technology cycle that measures
and offsets automatically geometric tolerance of rotary axes easily
on a 5-axis machine using a touch probe and a calibration sphere.
When the geometric tolerances that can lead to poor-quality
workpiece |
| MPC (Machine Protection Control) |
MPC (Machine Protection Control) It monitors
vibration with acceleration sensors mounted on the spindle. This
technology cycle stops the spindle to minimize the damage to the
machine when abnormal vibration value is detected. It is also equipped
with |
| Stored stroke check 2, 3 |
Stored Stroke Check 2, 3 Using the parameter
setting or the program commands, the boundaries between the effective
tool travel zone and the entry prohibition zone. This stops the
machine just before the tool enters the defined entry prohibition
zone. W |
| Stroke limit check before movement |
Stroke limit check before movement When beginning
to move in each block during an automatic operation, it checks whether
the end point enters a predefined prohibition zone. When the end point
is specified to enter a prohibition zone, an alarm is displayed |
| Inverse time feed |
Inverse Time Feed The inverse time feed indicates
the feed per rotation using inverse of time, without using length
unit mm for feedrate. The feedrate is represented in mm/min normally,
but this unit is inconvenient to use for the feed command of the |
| Tool retract and recover |
Tool Retract and Recover To replace the tool
damaged during machining or to check the status of machining, the
tool can be withdrawn from a workpiece. Also, the tool can then be
advanced again efficiently to restart machining. |
| Turn-mill spindle axis direction handle
feed |
Turn-mill spindle Axis Direction Handle Feed The
turn-mill spindle can be moved manually along the turn-mill spindle
stop angle (B-axis angle). |
| Addition of optional block skip (soft key
type 2-9) |
Addition of optional block skip (soft key type
2-9) When a slash (/) followed by a number (/n(n=2-9)) is specified at
the head of a block and the optional block skip switch n on the
operating panel is turned on, commands in the block specified by /n
c |
| NETservice |
NETservice A software installed on IoTconnector
for qualified support by Internet- based remote diagnostics |
| IoTconnector |
IoTconnector The IoTconnector allows the use of
online services of DMG MORI (e.g. NETservice) |
| Screen display Russian |
Screen display Russian Language on MAPPS Screen:
Russian Language on MAPPS Warning Screen: Russian Language on NC
Screen: English Language on PC Screen: English |
| Machine Data Connector (MDC) |
Machine Data Connector (MDC) A software installed
on IoTconnector for uniform machine data interface as an integrated
function of the DMG MORI Connectivity Hardware |
| 3D Data Model |
3D Machine Model Data The 3D model data of the
machine is provided. The data can be used in the customer´s CAD
system for various applications such as simulation. The
non-disclosure agreement needs to be concluded. |
| Special equipment |
Transformer (E30053) + Cable 120kVA !Unsupported
CE Regulation! |